How To Do Corners With Stacked Stone

Overview

Improve your charcoal-broil expanse with a fashionable stacked stone characteristic wall. Information technology's definitely a chore that y'all can do yourself and we'll show yous how. You'll learn how to gear up the wall, measure and cut the stacked stone pieces, and adhere them to the wall, using adhesive.

Tools and materials

Steps

1 Clean and seal the area

Starting time, clean the surface area you're planning to plough into the feature wall.  And so, use an outdoor silicon product effectually the edges. Scrape off any excess silicon with an icy pole stick.

2 Mix the primer

Now mix primer and water in a bucket. Make sure you read the instructions on the pack to go the correct water to primer ratio.

3 Prime the surface

Now use the primer the surface area, using a castor or roller. Make sure you cover the whole substrate and go out it to dry for 15 minutes.

4 Dry lay the first row of stacked stone

Stacked rock is made from natural stone and has variations in colour, texture and thickness. So earlier yous apply whatever adhesive, dry out lay out your first row against the wall to assist you piece of work out the wait you want.

five Measure and cut the stacked stone ends

Once y'all've dry out laid your first row of stacked rock, you're most likely to have a gap at the stop. Measure out the space and transfer those measurements to a piece of stacked stone, using your measuring equipment. Now cut stone to size. Then place it in the gap to make sure information technology fits.

6 Mix the adhesive

Mix the adhesive powder and liquid in a bucket until it's a toothpaste consistency. Again, brand certain you follow the instructions to get the right ratios.

7 Apply silicon to the back of the benchtop

Remove the dry laid row of stacked stone. Then use a bead of silicon at the very back of the benchtop. This volition aid seal the first row of stacked stone to the benchtop.

eight Apply the adhesive

Take your trowel and spread the first class of adhesive at the bottom of the wall. Apply enough for the first couple of rows of stacked stone.

ix Attach the stacked stone to the adhesive

Now lay the first row of stacked stone onto the agglutinative. Lay from the bottom and work your mode up, applying more adhesive to the wall every bit yous go. When making overlaps, don't worry about lining the joins upwards perfectly because it generally looks ameliorate off-centred. Only lay the stone to look as natural equally possible.

10 Cut the top row to size

When yous reach the peak, yous're more than likely to have an uneven space left for the last row.  Measure the remaining space height and use an angle grinder to cut the stack stone pieces to size.

11 Lay the top row of stacked stone

Then lay the final course of stacked stone along the acme row. It's all-time to apply the agglutinative to the dorsum of the stone, rather than to effort and trowel it over a pocket-sized department of wall. Clean up any mess with a sponge and h2o, and get out the wall to dry out.

Source: https://www.bunnings.com.au/diy-advice/home-improvement/walls/how-to-lay-a-stacked-stone-feature-wall

Share this post